MarineMax Acquires Pensacola Marina

Bahia Mar Marina
PENSACOLA, Fla., (February 2, 2016) – MarineMax, the nation’s largest recreational boat and yacht retailer, announced today that they have acquired the Bahia Mar Marina in Pensacola, Florida. Located on the Bayou Chico Channel, Bahia Mar Marina is a full-service marina with a 50 ton travel lift, working boat yard, large dry storage and on-site facilities for fiberglass, paint and bottom work. This facility also has covered and open wet slips, as well as a ship’s store. Other amenities include laundry, showers, restrooms, and a fuel dock offering non-Ethanol gas, diesel, and pump-out services. Bahia Mar Marina is also home to one of Pensacola’s most popular waterfront restaurants, The Oar House. MarineMax has been a proud member of the Pensacola community for 13 years and with this acquisition will be relocating the sales and service operations on Airport Boulevard to this new waterfront facility where they’ll combine all operations at one waterfront facility.

“MarineMax is more than a dealer, we are also a resource,” said Mark Breton, MarineMax Pensacola Store Manager. “Customers get access to a wealth of experience that can match them with the perfect boat from our unparalleled diversity of brands and models. We provide world-class service, educational programs, access to Getaways!® trips and assist in obtaining financing.”

MarineMax Pensacola at Bahia Mar Marina is equipped to provide a variety of services for most vessels. Open seven days a week from 8:00 am until 5:00 pm, with extended hours in the summer, MarineMax will continue to provide the excellent service that marina boat owners and guests have come to expect.

“We’re all boaters with such passion for the water we can’t help but share it,” continued Breton. “We offer multiple platforms beyond boat sales to share our joy and enable our customers to do the same.”

Show Your Boat Some Love This Winter

Boats in Storage
When it is cold we tend to forget about boating and our boats. We tuck them away in storage or just leave them sitting, alone and abandoned. You can show them that you care by providing some TLC. The following projects are sure to make your boat happy while preparing it for spring.

 

Give Your Boat a Hose Job

shutterstock_78033760

Hoses and clamps are often overlooked and underappreciated until one of them decides to fail and then it’s panic time. Inspect all your hose runs and hose clamps for cracks, rust and wear. Replace any hose run that show signs of cracking, kinked or abraded. Replace any hose clamp that has rust – even stainless steel corrodes. If the hose leads to a through-hull, double clamp both ends. This will better assure that you will find your boat floating when you get back to boating in the spring. If it is beyond your skill level, hire a professional from MarineMax, and your boat will know how much you care.

Give Your Boat the Spa Treatment

Fiberglass

Winter is a good time to fix all the nicks, scratches, dings and dents that you didn’t have time for while you and your boat were playing all summer. Fiberglass repair kits, polishes and wax can be found at most boating accessory and parts stores as well as many MarineMax stores. It may be time to take advantage of a MarineMax Makeover. MarineMax fiberglass repair professionals can make your boat look like new.

Makeover Your Boat’s Bottom

Bottom Paint

Cleaning your boats bottom of bugs, growth, debris and contaminants will reduce drag and have your boat looking sharp in the spring. If you keep your boat in saltwater, winter is a good time to give your boat a “bottom job” by painting it with anti-fouling paint. Bottom paint varies greatly from hard coating to ablative and by the amount of copper and other anti-fouling chemicals. With hard coat bottom paint the old paint must be removed before applying a new coat. With most ablative paint you can paint over the previous coat after thoroughly cleaning the bottom. With both, you will want to put two coats minimum. Your local MarineMax store is a good resource on what works best in your area.

Buy Your Boat Some New Toys

Radar

If your boat has been intending to upgrade her marine electronics, audio system or satellite TV system, winter is a prime time to do-it-yourself or hire a professional installer. Many MarineMax stores have great deals on these systems and can provide for their installation.

Spruce Up Your Boats Ride

Trailer

Winter is a great time to thoroughly inspect your boats trailer. Putting your boat in and out of the water repeatedly exposes the trailer to a corrosive environment. Make sure the wiring is all intact and all lights work including side lights. Check the brakes (if any) and suspension. You wouldn’t want to stress your boat when a wheel falls off. It may be time to replace your trailer. Your local MarineMax is a great resource for repairing or replacing your boats trailer. I am sure your boat would appreciate an new ride.

Take the time to show your boat you care this winter and be ready for warmer weather!

MarineMax Clearwater Win Prestigious Award

Boaters_Choice_Award
CLEARWATER, Fla., (September 22, 2015) – MARINAS.COM has recently announced the winners of the 2015 Boater’s Choice Awards and MarineMax Clearwater was in the top-5 in the Repair/Service Yard/Marina category.

“The entire MarineMax Clearwater team were all extremely gratified to receive this award,” said Jack Ezzell, MarineMax Clearwater Store Manager. “Especially our service team member. They work hard at making sure our customers receive exemplary service.”

The winner are determined by the members and visitors to Marinas.com worldwide who voted for their favorite marinas. Marinas.com reported that the 2015 participation was tremendous in the numbers voting.

“Achieving this level of recognition, I know, will only drive our team to higher levels of customer satisfaction,” offered Mike Nolan, MarineMax Clearwater Service Manager. “Our goal is to assure our customers that they will be back on the water with their family and friends quickly, with the least amount of hassle and at a fair price. Simply put, provide the best service experience possible.”

Keeping Your Outboard in Top Condition

MMX CW Service 5.13-12

Keeping a modern outboard running efficiently and reliably is not very difficult if you are diligent with a few preventive maintenance procedures. Learn how you can keep your outboard engine(s) running at their optimum.

Oil and Lubrication

The life blood of any internal combustion engine is the lubricating oil. Two-stroke motors require a mix of oil and fuel. With small outboards the oil is mixed in the portable tank, check the manual for proper mix, typically 50-parts fuel to 1-part 2-stroke engine oil. Larger 2-stroke outboards have in-line mixing where the 2-stroke oil is in a separate tank and mixed with the fuel automatically. Be sure to use premium brand 2-stroke engine oil.

4-stroke motors are similar to automobile engines with oil that cycles through the engine. You should check the engine oil level often. If the oil is low, add oil as needed to the recommended level as indicated on the dipstick. Always use the proper viscosity oil that the manufacturer recommends and use premium brand 4-stroke engine oil, this is not something you want to save a few dollars on.

4-Stroke Oil Change

Change the engine oil as the owner’s manual suggests, typically once a year. Experts recommend that you change the oil with the motor at operating temperature to remove the most oil possible. With the engine not running and the cowling off, open the oil drain port and collect the oil in a drain pan. This can be messy. However, if you use an extraction tube attached to the oil drain port or use an oil extraction vacuum pump with the extraction tube down the dip stick tube.

Let the engine drain completely. Remove the oil filter with an oil filter wrench. Some manufacturers, like some Mercury Marine models, will provide an oil collection container under the oil filter to keep the excess oil in the filter from dripping into the engine shroud. Otherwise a rag placed around the filter is the best way to keep the oil from getting all over. Use the type oil and filters that the owner’s manual recommends. Always use the best quality filters and oil, this is not something you want to skimp on. Put a nice coat of oil on the new filter gasket and screw the new filter into place, hand tight. Emphasis on tight. Close the drain port and add the oil through the oil fill. Tilt the motor up and then down to get the proper engine oil level on the dipstick.

Lower Unit Oil Change

Lower units should have the lubrication oil change annually. It is fairly simple process. You will need a drain pan, a flat head screwdriver, the proper lower unit oil as recommended by the outboard manufacturer, an oil pump with the proper fixture for your outboard model and some rags for cleanup. You can purchase what you don’t have a most marine stores. Place a container under the lower unit to catch the old oil. Remove the lower drain screw plug first. The oil will flow slowly until the upper vent screw plug is removed. Then the oil will flow freely.

Inspect both the oil for emulsification and the magnet at the end of the drain screw plug for metal filings. Emulsification occurs when water gets into the lower unit. The oil will look milky. A small amount emulsification is o.k. However, if it is pervasive or if there are large pieces of metal on the drain screw plug seek out a MarineMax Certified Mechanic about repairing or replacing the lower unit.

To replace the oil use put the proper fixture on the hose end of the pump. Screw fixture into the lower drain plug opening. Put the pump into the oil container by placing the intake into the container and screwing the pump onto the container cap threads. Pump the oil into the lower unit until it come out of the upper vent opening. Replace the upper vent screw plug and snug it tight. Remove the hose and fixture from the lower drain and quickly replace the lower drain screw plug. Wipe all the excess oil from the lower unit with a rag. To protect our oceans, rivers and lakes, put the used lower unit oil in a container and take it to a recycle center or hazardous waste facility.

Flush After Every Trip

Whether you boat in saltwater or freshwater, flushing out the engine after every use is crucial for the life of your engine. Most 2-stroke outboards require flushing devices that fit over the water intakes of the outboard. These are often referred to as “ear muffs” or “rabbit ears.” Simply attach a freshwater hose to the flushing device, slip it over the intakes, make sure the water is on fully and start the engine. Run the motor of 3 to 5-minutes making sure the exiting water stream is strong. Carefully test the temperature of the water coming out, it should be warm not scalding. If the temperature is overly hot, you may need a new water pump. Contact your local MarineMax Service Center for a proper evaluation.

On small outboards with portable tanks it is also recommended that you disconnect the fuel while the engine is running until it stalls. This assures that all the fuel in the carburetor is removed.

For most 4-stroke outboards and many modern larger 2-stroke outboards there is a back-flush port that allows the engine to be thoroughly flushed without running the motor. It has the added benefit of forcing sand or debris that may have been sucked through the intake out of the engine. Before connecting the freshwater hose, run the water for a bit to make sure there is nothing that has gotten into the hose such as bugs, lizards or debris. These are not good things to put through your outboard.

Fuel

Even though it may be more than a dollar more per gallon at the fuel dock, use marine grade fuel without ethanol. This is an expense you really don’t want to get cheap with. Ethanol absorbs moisture and separates over time with the water settling on the bottom of the tank where the fuel pickup resides.

Periodically

Check under the cowling and around the engine shroud for fuel or water leaks.

Clean and lubricate all moving parts by spraying anti-corrosive lubricants as the manual recommends.

Check fuel lines, primer bulb, fittings and clamps for damage, wear or corrosion.

Check the fuel tank and fuel tank vent for damage, corrosion or blockage.

All of the maintenance procedures described are critical to the life of your outboard. Especially the 4-stroke and the lower unit oil changes. The results, if oil changes are not done properly, could be severe. If you are not mechanically inclined or are unsure of how to proceed, your local MarineMax Service Center has factory certified mechanics that can provide excellent service at reasonable prices.